在 CentOS 上搭建 L2TP VPN

May 10, 2014 ☼ L2TPCentOS

**2014 年 12 月 6 日再次更新**

Layer Two Tunneling Protocol,缩写为 L2TP,是一种虚拟隧道协议,通常用于虚拟专用网。L2TP 协议自身不对传输的数据进行加密,但是可以和加密协议搭配使用,从而实现数据的加密传输。

引用于相当不靠谱的维基百科。

由于 PPTP 在部分运营商下无法连接,而我也换上了 KVM,所以就一直打算搭建 L2TP。对于我这种懒人,如果有一键包的那是最好不过,可惜的是,网上的一键包我都试了个遍,没有一个可以用,没办法,只要自己手动搭建了。

此教程在 32 位 CentOS 6.3 下通过

1. 更新系统

yum -y update

2. 安装必要的组件

yum install -y make gcc gmp-devel xmlto bison flex xmlto libpcap-devel lsof vim-enhanced man

3. 安装 Openswan 和 PPP

yum install openswan ppp

4. 安装 xl2tpd (http://pkgs.org/ 请寻找对应系统相应的版本)

wget http://dl.fedoraproject.org/pub/epel/6/i386/xl2tpd-1.3.6-1.el6.i686.rpm
rpm -Uvh xl2tpd-1.3.6-1.el6.i686.rpm
yum install xl2tpd

5. 配置

编辑 /etc/ipsec.conf

nano /etc/ipsec.conf

在最后添加

config setup
       nat_traversal=yes
       virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
       oe=off
       protostack=netkey

conn L2TP-PSK-NAT
       rightsubnet=vhost:%priv
       also=L2TP-PSK-noNAT

conn L2TP-PSK-noNAT
       authby=secret
       pfs=no
       auto=add
       keyingtries=3
       rekey=no
       ikelifetime=8h
       keylife=1h
       type=transport
       left= IP 地址
       leftprotoport=17/1701
       right=%any
       rightprotoport=17/%any

编辑 /etc/ipsec.secrets

nano /etc/ipsec.secrets

添加

IP 地址 %any: PSK "共享密钥"

修改 /etc/sysctl.conf

nano /etc/sysctl.conf

在最后添加

net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1

让 sysctl.conf 生效

sysctl -p

验证 ipsec 运行状态

ipsec setup stop
ipsec setup start
ipsec verify

如果显示一下内容就是成功了

Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path                                 [OK]
Linux Openswan U2.6.32/K2.6.32-431.11.2.el6.i686 (netkey)
Checking for IPsec support in kernel                            [OK]
SAref kernel support                                           [N/A]
NETKEY:  Testing for disabled ICMP send_redirects              [OK]
NETKEY detected, testing for disabled ICMP accept_redirects    [OK]
Checking that pluto is running                                  [OK]
Pluto listening for IKE on udp 500                             [OK]
Pluto listening for NAT-T on udp 4500                          [OK]
Checking for 'ip' command                                       [OK]
Checking /bin/sh is not /bin/dash                               [OK]
Checking for 'iptables' command                                 [OK]
Opportunistic Encryption Support                                [DISABLED]

编辑 /etc/xl2tpd/xl2tpd.conf

nano /etc/xl2tpd/xl2tpd.conf

修改

listen-addr = IP 地址
force userspace = yes

编辑 /etc/ppp/options.xl2tpd

nano /etc/ppp/options.xl2tpd

修改 DNS

ms-dns 8.8.8.8
ms-dns 8.8.4.4

编辑 /etc/ppp/chap-secrets

nano /etc/ppp/chap-secrets

添加自己的账号密码

username * userpass *

重启 xl2tp

service xl2tpd restart

开放端口以及转发

iptables -A INPUT -m policy --dir in --pol ipsec -j ACCEPT
iptables -A FORWARD -m policy --dir in --pol ipsec -j ACCEPT
iptables -t nat -A POSTROUTING -m policy --dir out --pol none -j MASQUERADE
iptables -A FORWARD -i ppp+ -p all -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A INPUT -m policy --dir in --pol ipsec -p udp --dport 1701 -j ACCEPT
iptables -A INPUT -p udp --dport 500 -j ACCEPT
iptables -A INPUT -p udp --dport 4500 -j ACCEPT
iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j MASQUERADE
service iptables save
service iptables restart

添加自启动

chkconfig xl2tpd on
chkconfig iptables on
chkconfig ipsec on

6. 至此,搭建完成,重启

reboot